LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2013 >> Azera >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Inhibitor Switch >> Repair Procedures >> Inspection >> Power Circuit Inspection
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Circuit Inspection

  1. Disconnect the Inhibitor swtich connector (A).
  2. Ignition KEY "ON" & Engine "OFF".
  3. Measure voltge between supplied power and ground at inhibitor circuit.

    Specification:  Approx. 12V