Fuel Sender
- Turn the ignition switch OFF, and then remove battery (-) cable.
- Remove the fuel pump assembly.
- Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level.
Courtesy of HYUNDAI MOTOR AMERICA
Pin No. Description 1 Fuel sender ground 2 - 3 Fuel sender signal 4 Fuel pump motor (+) 5 Fuel pump motor ground - Also check that the resistance changes smoothly when the float is moved from "E" to "F".
Position Resistance(Ω) Capacity (l ) E 198~205 5 1/2 64~66 37.5 Sender (F) 7~9 68