LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Equus Signature >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) & Sensors >> Passive Occupant Detection System (PODS) >> Repair Procedures >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Repair Procedures: Installation

  1. Install the PODS equipped seat cushion assembly. (Refer to SEAT & POWER SEAT )
  2. Install the front passenger seat assembly. (Refer to SEAT & POWER SEAT )
  3. Reconnect the battery negative cable.
  4. After installing the PODS, confirm proper system operation:
    1. Turn the ignition switch ON; the SRS indicator should be turned on for about six seconds and then go off.

      Telltale lamp will turn on for 4 seconds and be turned off for 4 seconds. After the 8 seconds, it shall remain off if the PODS does not require suppression and the passenger airbag is enabled.

      NOTE: Be sure to perform PODS reset with scantool after replacing PODS equipped seat cushion.
scientia non olet · About LEMON Manuals