LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Wheel Alignment >> Wheel >> Run Out Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel Run-out by using a dial indicator as illustration below.
    WHEEL RUN-OUT CHART

    Run-out Aluminum Steel
    Radial mm (in) Below 0.3 (0.012) Below 0.6 (0.024)
    Lateral mm (in) Below 0.3 (0.012) Below 1.0 (0.039)
  3. If measured value exceeds the standard value, replace the wheel.
Fig 1: Inspecting Wheel Run Out
G04802388Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals