LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Control System) >> Throttle Position Sensor (TPS) >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position Sensor (TPS): Inspection

WARNING: This page is about a different car, the 2011 Hyundai Elantra Touring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect a scan tool on the Data Link Connector (DLC).
  2. Start engine and check output voltages of TPS at C.T and W.O.T.

    3. Specification:  Refer to "SPECIFICATION "

  3. Turn ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect TPS connector and measure resistance between TPS terminals 2 and 3.

Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals