LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra GLS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC P0606: ECM/PCM Processor >> Inspection/Repair >> System Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

System Inspection

  1. Ignition "OFF".
  2. Disconnect PCM connector.
  3. Ignition "ON".
  4. Measure voltage between terminal 6 of the PCM harness connector and chassis ground.

    Specification:  Remain stable at battery voltage

  5. Are circuits remaining stable at battery voltage?

    YES 

    Using a GDS, check PCM software version and upgrade as necessary. If version is the newest one, check PCM for contamination, deterioration, or damage. Substitute with a known-good PCM and check for proper operation. If the problem is corrected, replace PCM and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    If voltage fluctuates, check circuit for loose, bent or corroded terminals, Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals