LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Transaxle Oil Temperature Sensor >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Remove the battery and the battery tray.

    (Refer to "CHARGING SYSTEM ")

  2. Remove the under cover (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft))

    Fig 1: Identifying Under Cover
    G07264283Courtesy of HYUNDAI MOTOR CO.
  3. Replace new gasket and the plug after draining the automatic transaxle fluid by removing the drain plug. (Refer to "HYDRAULIC SYSTEM (FLUID) ")
  4. Remove the air breather hose (A).
  5. Remove the valve body cover (B).

    Tightening torque: 

    13.7 ~ 15.7 N.m (1.4 ~ 1.6 kgf.m, 10.8 ~ 11.6 lb-ft)

    Fig 2: Identifying Air Breather Hose
    G07264284Courtesy of HYUNDAI MOTOR CO.
  6. Disconnect the oil temperature sensor connector (A).
    Fig 3: Identifying Oil Temperature Sensor Connector
    G07264285Courtesy of HYUNDAI MOTOR CO.
  7. Remove the oil temperature sensor (A) after removing a bolt.

    Tightening torque: 

    9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

    Fig 4: Identifying Oil Temperature Sensor
    G07264286Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals