LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Shift Lever >> Repair Procedures >> Removal >> Control Cable Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Cable Replacement

  1. Remove the center console assembly. (Refer to "INTERIOR (CONSOLE) ".)
  2. Remove the control cable (A).
    Fig 1: Identifying Control Cable
    G07264342Courtesy of HYUNDAI MOTOR CO.
  3. Remove the control cable assembly in the vehicle after removing the nuts (B) and the retainer (A).

    Tightening torque: 

    11.8 ~ 14.7 N.m (1.2 ~ 1.5 kgf.m, 8.7 ~ 10.9 lb-ft)

    Fig 2: Identifying Retainer
    G07264343Courtesy of HYUNDAI MOTOR CO.
  4. Remove the nut (C).

    Tightening torque: 

    9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

  5. Remove the cable (B) from the bracket (A) at transaxle assembly side (Refer to "AUTOMATIC TRANSAXLE ").
    Fig 3: Identifying Bracket
    G07264344Courtesy of HYUNDAI MOTOR CO.
  6. Remove the control cable inside of cab.
scientia non olet · About LEMON Manuals