October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal and Installation

Remove the water pipe.
(Refer to "WATER PIPE ")
Remove the oil pressure switch (A).
Tightening torque: 34.3 ~ 44.1N.m (3.5 ~ 4.5kgf.m, 25.3 ~ 32.5lb-ft)

Fig 1: Identifying Oil Pressure Switch
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: When installing, apply sealant on the thread part.
Installation is in the reverse order of removal.