July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Lateral Accelerometer: Service and Repair

Removal

1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
2. Remove the floor console.
3. Disconnect the yaw rate & lateral G sensor connector (A).

4. Remove the mounting bolts (B).

Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 7.6 Ib-ft)

5. Installation is the reverse of removal.