LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Shift Lever >> Repair procedures >> Removal >> Shift Lever Assembly Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Shift Lever Assembly Replacement

  1. Remove the center console.

    (Refer to "interior (CONSOLE )" )

  2. Disconnect the connector (A).
    Fig 1: Identifying Shift Lever Assembly Connector
    G08804749Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the control cable (B).
    Fig 2: Identifying Shift Lever Assembly Control Cable
    G08804750Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the shift lock cable (C) and key lock cable (B) by removing the nuts (A-2ea).

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 3: Identifying Shift Lock And Key Lock Cable With Mounting Nuts
    G08804751Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the shift lever assembly (A) by removing the bolts (B-4ea).

    Tightening torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 4: Identifying Shift Lever Assembly With Mounting Bolts
    G08804752Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal.
    NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
scientia non olet · About LEMON Manuals