LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis Coupe 2.0T Track >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) - 2.0L >> DTC P0130: O2 Sensor Circuit (Bank 1/Sensor 1) >> Ground Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ground Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect HO2S connector.
  3. Measure resistance between ground terminal of HO2S (B1/S1) harness connector and chassis ground.

    Specification  : Approx. 0Ω

  4. Is resistance within the specification?

    YES 

    NO 

    • Go to the next Inspection procedure.
      NOTE: HO2S must have a clean air reference to function properly. The air is obtained by way of the sensor wire (s). Do not attempt to repair the wire (s), connector, or the terminals.
scientia non olet · About LEMON Manuals