LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis Coupe 2.0T Track >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Button Engine Start System >> PDM (Power Distribution Module) >> Repair Procedures >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A).

    (Refer to "CRASH PAD ")

    Fig 1: Identifying Crash Pad Lower Panel
    G06510252Courtesy of HYUNDAI MOTOR CO.
  3. Disconnect the power distribution module (PDM) connector.
  4. Remove the power distribution module (A) after loosening nut and bolt.
    Fig 2: Identifying Power Distribution Module, Bolt, & Nut
    G06510253Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals