LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis 4.6 >> Repair and Diagnosis >> Brakes >> Traction Control >> ESC (Electronic Stability Control) System >> Front Wheel Speed Sensor >> Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Wheel Speed Sensor: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 100 O resister must be used as shown.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G04802654Courtesy of HYUNDAI MOTOR CO.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    Fig 2: Wheel Speed Sensor Output Voltage Graph
    G04802655Courtesy of HYUNDAI MOTOR CO.

    V_low: 0.59V ~ 0.84V

    V_high: 1.18V ~ 1.68V

    Frequency range: 1 ~ 2,000Hz

scientia non olet · About LEMON Manuals