P0708 Transmission Range Sensor Circuit High Input: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Open/Ground Short	Open or short in circuit Misalignment of neutralization for inhibitor switch Faulty Inhibitor switch Faulty TCM
Enable Conditions	IG "ON" 10.2V < Battery Voltage < 14V CAN Communication : Normal Not in Fail Safe mode Output RPM is normal
Threshold Value	Vehicle Speed ≥ 30km/h and No signal from the inhibitor switch
Diagnostic Time	More than 30 seconds
Fail Safe	No self learning control No adaptive shift control Shift Lock is locked Recognition as D, if all signal are OFF.