October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor Scantool Data

Check status
1. IG "ON" & Engine "OFF"
2. Monitor the "ECM, Key and Smartra Status" Parameter on the Scantool.
  Specification: 'LEARNT'
  
  Fig 1: Scan Tool Display - "ECM Status" Parameter
  Courtesy of HYUNDAI MOTOR CO.
3. Have both the ECM and KEY status been learnt?
  YES
  - Substitute with known good "virgin" transponder and go to "COMPONENT INSPECTION " Procedure.
  NO
  - Go to "COMPONENT INSPECTION " Procedure.