LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis 3.8 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Immobilizer Control System >> DTCS With Programmable Interface Controller (Pic) >> P1675 Immobilizer-Transponder Programming Error >> Component Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

  1. Check transponder
    1. IGN "ON" & Engine "OFF"
    2. Neutralize ECM and Register transponder key by scantool.
      NOTE: Pin code is required to Neutralize ECM and to Register transponder key
    3. Are Neutralizing and Registering completed normally?

      YES 

      • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      • Substitute with a known-good transponder and perform key teaching procedure with scanner.

        If the problem is corrected, replace transponder and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals