General Information: DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSE

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage range check	Open in signal harness Open in ground harness Poor connection or damaged harness Faulty Heated HO2S Sensor (HO2S)
Enable Conditions	HO2S Sensor operative readiness HO2S Sensor preheating and full heating phases finished No relevant failure 10V < Battery voltage < 16V
Threshold Value	0.37 < Downstream HO2S Sensor voltage < 0.49V & sensor element resistance > 60kΩ
Diagnostic Time	30 sec.
MIL On Condition	2 Driving Cycles