LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Azera V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Level Sensor: Service and Repair





Removal

1. Preparation
(1) Remove the Service Cover (A) in the trunk.




(2) Disconnect the Fuel Pump Connector (A).




(3) Start the engine and wait until fuel in fuel line is exhausted.
(4) After the engine stalls, turn the ignition switch OFF.
2. Remove the Service Cover (A) in the tank.




3. Disconnect Sub Fuel Sender Connector (A) and Suction Tube Quick-Connector (B).




4. Unfasten the Sub Fuel Sender mounting bolts (C) and remove the Sub Fuel Sender.






Installation

1. Install the Sub Fuel Sender according to the reverse order of "REMOVAL" procedure.

Tightening torque
2.0 - 2.9 Nm (0.2 - 0.3 kgf-m, 1.4 - 2.2 lbf-ft)
scientia non olet · About LEMON Manuals