Component Inspection 1
- IG KEY OFF.
- Remove the TCU.
- Measure the resistance between "S1" solenoid-valve terminal and ground terminal of "S1" solenoid-valve.
- Measure the resistance between "S2" solenoid-valve terminal and ground terminal of "S2" solenoid-valve.
Specification: Approx. 11~15Ω (20°C)
- Is resistance within specifications?
YES:
- Go to "COMPONENT INSPECTION 2 " procedure.
NO:
- Replace solenoid-valve as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.