Calibration (Setting up the zero angle)

Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases.

• Replacement of the Steering Wheel Angle Sensor
• Replacement or repair of the Steering column
• Detection of DTC codes (C1260, C1261)
• Replacement of the sensor cluster
• Replacement of HECU

Lateral G-Sensor calibration must be performed as following cases.

• Replacement of the sensor cluster
• Replacement of HECU
• Detection of DTC code (C1283)

Pressure Sensor calibration must be performed as following cases.

• Replacement of HECU
• Detection of DTC code (C1237)