LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Azera V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Hi-Scan (Pro) Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hi-Scan (Pro) Check





HI-scan (Pro) Check
1. Turn the ignition switch OFF.
2. Connector the Hi-scan(pro) to the 16P data link connector located the driver's side kick panel.




3. Turn the ignition switch ON.
4. Check for diagnostic trouble code using the Hi-scan (pro)
5. After completion trouble of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-scan(pro).
6. Disconnect the Hi-scan(pro) from the 16P data link connector.
scientia non olet · About LEMON Manuals