LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Azera Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC Codes >> DTC P1676 SMARTRA Message Error >> Component Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

  1. Check status
    1. IGN "ON" & Engine "OFF" with key intended to register.
    2. Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter on the Scantool.

      Specification : 'LEARNT'

      Fig 1: Scan Tool Display - Key Status (Learnt)
      G05536979Courtesy of HYUNDAI MOTOR CO.
    3. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter within specifications?

      YES 

      • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      • Go to "Check SMARTRA" procedure
  2. Check SMARTRA
    1. IGN "ON" & Engine "OFF"
    2. Neutralize "SMARTRA" and Register transponder key by scantool.
      NOTE: Pin code is required to Neutralize SMARTRA and to Register transponder key
    3. Are Neutralizing and Registering completed normally?

      YES 

      • Perform all the key teaching procedure with scantool. (All the keys must be retaught) and then, go to "VERIFICATION OF VEHICLE REPAIR " Procedure.
        NOTE: Never change the password after SMARTRA is neutralized with scantool Otherwise, Virgin TP only possible to register.

      NO 

      • Substitute with a known-good SMARTRA and check for proper operation.

        If the problem is corrected, replace SMARTRA and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals