October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

Ignition "OFF".
Disconnect P/S switch connector.

Start the engine, and measure voltage between P/S switch harness connector and chassis ground referring to specification.

Specification

P/S SWITCH VOLTAGE SPECIFICATION

Steering Wheel	Voltage
Straight ahead	Approx. B+
Turned	Approx. 0V

Is voltage within the specification?
YES:
- Go to "COMPONENT INSPECTION " procedure.
NO:
- Repair open or short in harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure.