LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2008 >> Tiburon GT, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA-GSL 2.7L) >> DTC Troubleshooting Procedures >> DTC P0461 Fuel Level Sensor "A" Circuit Range/Performance >> Verification Of Vehicle Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Verification Of Vehicle Repair

  1. Return vehicle to original condition.
  2. Start engine to normal operating temperature.
    NOTE: Evaporative Emissions Systems (EVAP) Leak Tests can be run by the Scan Tool. The tests are automated and provide either a pass-fail result or directions to check for DTCs.
  3. Install scan tool and clear DTC.
  4. Perform "EVAP. LEAKAGE TEST" mode referring to enable conditions below.
    NOTE: EVAP. Leakage Test enable conditions.
    • Following conditions must be fulfilled to start the test.
      1. Engine warm up at Idle Status.
      2. No relevant DTC.
      3. Fuel level is below 80%.
  5. Monitoring for (pending) DTC. Is the same DTC set?

    YES: 

    • Go to the applicable troubleshooting procedure.

    NO: 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals