LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2008 >> Entourage GLS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0111 Intake Air Temperature Sensor1 Circuit Range/Performance >> Component Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

  1. Check resistance of IATS
    1. IG "OFF" and disconnect IATS connector.
    2. Measure resistance between terminal 4 and 5 of IATS connector. (Component Side)

      SPECIFICATION: 

      TEMPERATURE AND RESISTANCE CHART

      Temp. (°C/°F) Resistance (kΩ) Temp. (°C/°F) Resistance (kΩ)
      -40 (-40) 95.95 ~ 105.78 20 (68) 3.42 ~ 3.61
      -20 (-4) 27.4 ~ 29.77 40 (104) 1.43 ~ 1.5
      0 (32) 9.08 ~ 9.72 60 (140) 0.66 ~ 0.69
      10 (50) 5.49 ~ 5.83 80 (176) 0.33 ~ 0.34
      Fig 1: Measuring Resistance Between Terminal 4 And 5 Of IATS Connector
      G05321948Courtesy of HYUNDAI MOTOR CO.
    3. Is the measured resistance within specification?

      YES 

      NO 

      • Substitute with a known - good IATS and check for proper operation. If the problem is corrected, replace IATS and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals