LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Entourage GLS >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System (A5HF1) >> Automatic Transaxle System >> DTC P0722 Output Speed Sensor Circuit - No Signal >> Monitor SCANTOOL Data
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Monitor SCANTOOL Data

  1. Connect scantool to data link connector (DLC).
  2. Engine "ON".
  3. Monitor the "OUTPUT SPEED SENSOR" parameter on the scantool.
  4. Driving at speed of over 30 Km/h (19 mph).
    5. Fig 1: Monitor Scantool Data - NO (OUTPUT SPEED)
    G04880104Courtesy of HYUNDAI MOTOR CO.
  5. Does "Output speed sensor" follow the reference data?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or TCM (PCM)'s connector or was repaired and TCM (PCM) memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals