Specifications Index

ENTOURAGE SPECIFICATIONS INDEX

System			Specification/Procedure
Air Conditioning
Service			AIR CONDITIONER
Torque			Torque values are in the text of the article. HEATING, VENTILATION & AIR CONDITIONING
Axle Nut/Hub Nut
Front			177-199 Ft. Lbs. (245-275 Nm)
Rear			145-188 Ft. Lbs. (200-260 Nm)
Battery			CHARGING SYSTEM
Brakes
Bleeding Sequence			BLEEDING OF BRAKE SYSTEM
Disc Brakes
Service Specifications			SERVICE STANDARD
Torque			SERVICE STANDARD
Charging
Generator			CHARGING SYSTEM
Torque			N/A
Drive Belts
Routing			ACCESSORY DRIVE BELT
Engine Cooling
General Service Specifications
3.8L			SPECIFICATION
Radiator Cap Pressure			14-18 psi
Thermostat R & I			THERMOSTAT
Water Pump R & I			WATER PUMP
Engine Mechanical
3.8L
Compression			COMPRESSION
Oil pressure			18.77 psi at 1000 RPM
Overhaul			ENGINE (G6DA - GSA 3.8)
Torque			TIGHTENING TORQUE
Fluid Specifications			See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque			53-55 Ft. Lbs. (72-75 N.m)
Fuel System
Pressure Specification			54.3-55.8 psi
Fuel Pressure Test Procedure			FUEL PRESSURE TEST
Fuel Filter Location			In fuel pump assembly.
Fuel Filter R & I			FUEL PUMP (FP)
Ignition
Firing Order & Cylinder Identification			FIRING ORDER & CYLINDER IDENTIFICATION
Spark Plug
NGK - IFR5G-11
Gap			0.0394-0.0433 in. (1.0-1.1 mm)
Torque			15-22 Ft. Lbs. (20-30 N.m)
Starting
Starter			STARTING SYSTEM
Torque			N/A
Wheel Alignment
Adjustment Specifications			WHEEL ALIGNMENT
Torque			TIGHTENING TORQUE
Wheel & Tire
Wheel Lug Nut Torque			65-80 Ft. Lbs. (90-110 N.m)