October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

Check Main Relay

IG "OFF"
Disconnect Main Relay
Measure resistance between terminal 5 and 3 of Main Relay

Measure resistance between terminal 4 and 2 of Main Relay.

SPECIFICATION:

SPECIFICATION

Terminal	continuity
3 ~ 5	NO
2 ~ 4	YES (Approx. 70Ω ~ 120Ω)

Fig 1: Measuring Resistance Between Terminal 4 And 2 Of Main Relay

G04879952

Courtesy of HYUNDAI MOTOR CO.

Is the measured resistance within specification ?
YES
- Substitute with a known - good PCM and check for proper operation.
  If the problem is corrected, replace PCM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NOTE: There is a memory reset function on scantool that can erase optional parts automatically detected and memorized by PCM.

NO
- Substitute with a known - good Main Relay and check for proper operation.
  If the problem is corrected, replace Main Relay and go to "VERIFICATION OF VEHICLE REPAIR " procedure.