LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Entourage GLS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0198 Engine Oil Temp. Sensor High Input >> Signal Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Circuit Inspection

  1. Check Voltage
    1. IG "OFF" & ENG "OFF"
    2. Disconnect OTS connector
    3. IG "ON" & ENG "OFF"
    4. Measure voltage between harness terminal 1 of OTS and chassis ground.

      Specification : Approx. 5V

    5. Is the measured voltage within specification ?

      YES 

      NO 

      • Go to " 2Check open in harness" as follow.
  2. Check open in harness
    1. IG "OFF" & ENG "OFF"
    2. Disconnect OTS and PCM connector.
    3. Measure resistance between terminal 1 of OTS harness connector and terminal 4 of PCM harness connector.

      Specification : Approx. below 1 Ω

    4. Is the measured resistance within specification ?

      YES 

      NO