LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Entourage GLS >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> BCM (Body Control Module) >> DTC B1611 Lost Communication With FAM, Bus Failure >> Component Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Component Inspection

  1. Check FAM
    1. Connect scantool to Data Link Connector (DLC).
    2. Ignition "ON" & engine "OFF".
    3. Substitute with a known-good FAM and Check if the DTC is erased.
    4. Is the DTC erased?

      YES 

      Substitute with a known-good FAM and check for proper operation.

      If the problem is corrected, replace IMS and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      Go to " 2Check IPM" procedure.

  2. Check IPM
    1. Connect scantool to Data Link Connector (DLC).
    2. Ignition "ON" & engine "OFF".
    3. Substitute with a known-good IPM and Check if the DTC is erased.
    4. Is the DTC erased?

      YES 

      Substitute with a known-good IPM and check for proper operation.

      If the problem is corrected, replace IPM and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals