LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4CF2) >> Automatic Transaxle System >> DTC P0708 Transaxle Range Switch - High Input >> DTC Detecting Condition
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC P0708 Transaxle Range Switch - High Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item Detecting Condition Possible cause
DTC Strategy 
  • Check for multiple signals
  • Open or short in TRANSAXLE RANGE SWITCH
  • Faulty Shift cable adjustment
  • Faulty Inhibitor switch and Manual control lever position adjustment
  • Faulty TRANSAXLE RANGE SWITCH
  • Faulty PCM
Enable Conditions 
  • Battery Voltage ≥ 10V
Threshold value 
  • Multiple signal
Diagnostic Time 
  • More than 10 sees
Fail Safe 
  • Recognition as previous signal
  • When signal is input "D" and "N" at the same time, TCM regards it as "N" RANGE
  • After PCM/TCM Reset, if the PCM/TCM detects multiple signal or no signal, then it holds the 3rd gear position
scientia non olet · About LEMON Manuals