LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis (Single Page) >> Body & Frame >> Mirrors >> Exterior >> Rear Door >> Replacement >> Module Assembly Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Module Assembly Replacement

  1. Remove the rear door trim (See REPLACEMENT  ).
  2. Remove the glass (See GLASS REPLACEMENT  ).
  3. Remove the inside handle (See LATCH ASSEMBLY REPLACEMENT  ).
  4. Remove the outside handle (See POWER WINDOW MOTOR REPLACEMENT  ).
  5. After loosen the door module mounting bolts, remove the door module (A).
    Fig 1: Identifying Door Module
    G04881101Courtesy of HYUNDAI MOTOR CO.
  6. Disconnect the connector (C).
  7. Detach the clips, then remove the wiring harness (A).
  8. Remove the module (B).
    Fig 2: Identifying Connector, Wiring Harness And Module
    G04881102Courtesy of HYUNDAI MOTOR CO.
  9. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly and each cable is connected securely.
    • Make sure the door lock and open properly.
scientia non olet · About LEMON Manuals