LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Accent GS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC Troubleshooting Procedures >> DTC P0630 VIN Not Programmed Or INCOMPACTIBLE-ECM/Pcm >> Monitor SCANTOOL Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor SCANTOOL Data

  1. Ignition "OFF"
  2. Connect Scantool and Ignition "ON"
  3. Monitor the ECM/PCM status using the VIN READING function.
  4. Is the ECM/PCM status Virgin ?

    YES  : --> Perform VIN writing procedure according to the direction on the scantool screen and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> Fault is intermittent caused by poor contact in Sensor's and/or ECM/PCM's connector or was repaired and ECM/PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

scientia non olet · About LEMON Manuals