Crankshaft, Engine

Crankshaft
Pin O.D. 45 mm (1.77 inch)
Journal O.D. 57 mm (2.244 inch)
Bend 0.03 mm (0.0012 inch) or less
Out-of-round, taper of journal and pin 0.01 mm (0.0004 inch) or less
Limit 0.030 mm (0.0012 inch)
End play 0.06 - 0.260 mm (0.0023 - 0.010 inch)
Undersize rework dimension of pin
0.25 mm (0.010 inch) 44.725 - 44.740 mm (1.7608 - 1.7614 inch)
0.50 mm (0.020 inch) 44.475 - 44.490 mm (1.7509 - 1.7516 inch)
0.75 mm (0.030 inch) 44.225 - 44.240 mm (1.7411 - 1.7417 inch)
Undersize rework dimension of journal
0.25 mm (0.010 inch) 56.727 - 56.742 mm (2.2333 - 2.2339 inch)
0.50 mm (0.020 inch) 56.477 - 56.492 mm (2.2235 - 2.2240 inch)
0.75 mm (0.030 inch) 56.227 - 56.242 mm (2.2136 - 2.2142 inch)