LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2006 >> Santa Fe GLS, 2.7 D, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G6BA-GSL 2.7) >> Gasoline Engine Control System >> Engine Coolant Temperature Sensor (ECTS) >> Sensor Inspection (ECTS)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor Inspection (ECTS)

  1. USING HI-SCAN (PRO)
    TEMPERATURE AND RESISTANCE SPECIFICATIONS

    Check Item Data Display Check Condition Water Temperature [°C (°F) ] Resistance (kΩ)
    Engine Coolant Temperature Sensor (ECTS) Engine Coolant Temperature Sensor (ECTS) IG ON or Engine Running -40 (-40) 48.14
    20 (68) 2.31 ~ 2.59
    80 (178) 0.32
    110 (230) 0.15
  2. USING MULTI-METER
    1. Remove the Engine Coolant Temperature Sensor (ECTS) from the intake manifold.
    2. With the temperature sensing portion of ECTS immersed in hot engine coolant, check the resistance.
    3. If the resistance deviates from the standard value greatly, replace the sensor.
    TEMPERATURE AND RESISTANCE SPECIFICATIONS

    Temperature [°C (°F) ] Resistance (kΩ)
    0 (32) 5.79
    20 (68) 2.31 ~ 2.59
    40 (104) 1.15
    80 (176) 0.32
    Fig 1: Checking Engine Coolant Temperature Sensor Using Multi-Meter
    G04932067Courtesy of HYUNDAI MOTOR CO.
  3. USING VOLT-METER
TEMPERATURE SPECIFICATIONS

Check Item Water Temperature [°C (°F) ] Voltage (V)
Water Temperature Sensor (WTS) Signal Output 20 (68) 3.6 - 3.8
40 (104) 2.7 - 3.0
80 (176) 1.2 - 1.5
scientia non olet · About LEMON Manuals