LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2006 >> Accent Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (A4AF3) >> Automatic Transaxle System >> DTC U0100 Can-Time Out Ecu >> Monitor SCANTOOL Data
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Monitor SCANTOOL Data

  1. Connect scantool to data link connector(DLC).
  2. Engine "ON".
  3. Monitor the "CAN COMMUNICATION SERVICE DATA (ENGINE RPM, VEHICLE SPEED SENSOR, THROTTLE P. SENSOR)" parameters on the scantool.
  4. Does "CAN BUS LINE DATA" follow the reference data?

    YES  : --> Fault is intermittent caused by poor contact in the sensor's and/or TCM's connector or was repaired and TCM memory was not cleared. Go to VERIFICATION OF VEHICLE REPAIR  procedure.

    NO  : --> Go to "TERMINAL & CONNECTOR INSPECTION " procedure.

scientia non olet · About LEMON Manuals