LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2005 >> XG350 Base >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Electronic Time & Alarm Control System >> Transmitter Code Registration >> Using Code Saving Switch
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Using Code Saving Switch

  1. Remove the lower crash pad panel.
    Fig 1: Removing Lower Crash Pad Panel
    G00720652Courtesy of HYUNDAI MOTOR CO.
    NOTE: Don't disconnect the negative (-) battery terminal.
  2. To store new codes:
    • Activate the keyless entry/receiver unit and change code saving switch on the ETACS module from "OFF" to "SET".
    • The secret codes from the transmitter will be stored into the receiver unit when the door lock button or unlock button is pressed on the transmitter.
    • Save the 2nd transmitter codes in the same manner.
      Fig 2: Identifying Code Saving Switch On ETACS
      G00720653Courtesy of HYUNDAI MOTOR CO.
  3. Return the code saving switch on the ETACS module from "SET" to "OFF".
    Fig 3: Identifying Code Saving Switch "SET" & "OFF" Positions
    G00720654Courtesy of HYUNDAI MOTOR CO.
  4. Install the lower crash pad panel.
scientia non olet · About LEMON Manuals