September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Fuel Injector: Installation
- Install a new grommet and O-ring on the injector.
- Apply a coating of oil or gasoline to the O-ring of the injector.
Courtesy of HYUNDAI MOTOR CO.
- Fit the injector onto the delivery pipe by twisting it to the left and right.
- Be sure the injector turns smoothly.
NOTE:
If it does not turn smoothly, the O-ring may be jammed: Remove the injector and re-insert it into the delivery pipe and recheck.
If the O-ring is damaged, replace it.
Courtesy of HYUNDAI MOTOR CO.