LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Accent GL, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> DTC Troubleshooting Procedures >> DTC P0036: O2 Sensor Heater Control Circuit (Bank 1/Sensor 2) >> Control Circuit Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect HO2S sensor connector.
  3. Ignition "ON" & Engine "OFF"
  4. Measure voltage between terminal 3 of sensor harness connector.

    Specification: approximately 3.7V

    Fig 1: Measuring Voltage Between Terminal 3 Of Sensor Harness Connector
    G03851688Courtesy of HYUNDAI MOTOR CO.
  5. Is measure voltage within Specification?

    YES 

    NO 

scientia non olet · About LEMON Manuals