LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Accent GL, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System >> Gasoline Engine Control System >> Idle Speed Control Actuator (ISCA) >> Actuator Inspection >> Resistance Measurement Between Terminals
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Resistance Measurement Between Terminals

  1. Disconnect the connector at the idle speed control actuator.
  2. Measure the resistance between terminals.

    Standard value 

    Terminal 1 and 2: 16.6~18.60

    Terminal 2 and 3: 14.5~16.50 [at 20°C (68°F)]

  3. Connect the connector to the idle speed control actuator.
scientia non olet · About LEMON Manuals