LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Accent GL, 2D Hatchback, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> On-Vehicle Testing >> Checking Stator Power Source Circuit >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Turn ignition on, with engine off. Ensure that the charge indicator light is illuminated.
  2. NOTE: If the leads of the Digital Volt-Ohmmeter (DVOM) are not connected properly, there will be no reading on the ohmmeter. Be sure to connect the leads correctly.
  3. Disconnect pre-excitation resistor 4-pin connector, located in engine compartment fuse box. Connect the positive lead of the DVOM to terminal No. 4 and the negative lead to terminal No. 1 of the pre-excitation resistor. See Fig 1 .
Fig 1: Identifying Pre-Excitation Resistor Terminals
G00029429Courtesy of HYUNDAI MOTOR CO.