LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2003 >> XG350 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (1 Of 2) >> Diagnostic Tests >> DTC P0117: Engine Coolant Temperature Circuit Low Input >> Scantool Diagnostics >> Monitor Scantool Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor Scantool Data

  1. Engine "ON".
  2. Monitor Engine Coolant Temperature Sensor parameter on Current data.
  3. After the engine has been starting, Check that ECT rises steadily to about 90°C (194°F) and ECT stabilizes when the thermostat opens.
    1. ECT rises steadily to about 90°C (194°F) and ECT stabilizes when the thermostat opens.
    TEMPERATURE RESISTANCE SPECIFICATION CHART

    Temperature (°C/°F) 0°C (32°F) 20°C (68°F) 40°C (104°F) 80°C (176°F)
    Resistance (kΩ) 5.9 2.5 1.1 0.3
    Voltage (V) 3.4~3.6 2.5~2.7 1.5~1.7 0.5~0.7
    Fig 1: Monitor Engine Coolant Temperature Sensor Parameter On Current Data - Sensor Data At Normal
    G07377610
    Fig 2: Monitor Engine Coolant Temperature Sensor Parameter On Current Data - Sensor Data At Open
    G07377611
    Fig 3: Monitor Engine Coolant Temperature Sensor Parameter On Current Data - Sensor Data At Short
    G07377612
  4. Is Current data displayed correctly?

    YES

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO

scientia non olet · About LEMON Manuals