LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2003 >> XG350 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls - System & Component Testing >> Sensors & Switches >> Switches >> Transaxle Range (TR) Switch (A/T)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transaxle Range (TR) Switch (A/T)

  1. TR switch is mounted to transaxle, near shift lever mechanism. Turn ignition off. Disconnect TR switch. Set TR switch to "P" position. Check for continuity between specified terminals. See TRANSAXLE RANGE SWITCH TESTING  table. If continuity is present, go to next step. If continuity is not present, ensure TR switch is adjusted correctly. If adjustment is correct, replace TR switch .
  2. Turn ignition off. Set TR switch to "N" position. Check for continuity between specified terminals. See TRANSAXLE RANGE SWITCH TESTING  table. See Fig 1 or Fig 2 . If continuity is present, no problem is found at this time. If continuity is not present, ensure TR switch is adjusted correctly. If adjustment is correct, replace TR switch.
TRANSAXLE RANGE SWITCH TESTING

Switch Position (1) Test Between Terminals No.
Accent
Park 6 & 9; 7 & 8
Neutral 6 & 12; 7 & 8
Elantra, Santa Fe, Sonata & XG350
Park 3 & 8; 9 & 10
Neutral 4 & 8; 9 & 10
Tiburon
Park 3 & 9; 7 & 8
Neutral 3 & 12; 7 & 8
(1) See Fig 1 or Fig 2 .
Fig 1: Identifying Transaxle Range Switch Harness Connector Terminals (Accent & Tiburon)
G95F31166Courtesy of HYUNDAI MOTOR CO.
Fig 2: Identifying Transaxle Range Switch Harness Connector Terminals (Elantra, Santa Fe, Sonata & XG350)
G99H03479Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals