| Piston Ring | Ring Groove Width | No.1 | | 1.230 - 1.250 Millimeter (mm) |
| | No.2 | | 1.220 - 1.240 Millimeter (mm) |
| | Oil | | 2.515 - 2.535 Millimeter (mm) |
| Number Of Rings Per Piston | | | 3 |
| Compression Rings | | | 2 |
| Oil Ring | | | 1 |
| Compression Ring Type | No.1 | | Barrel Type, Steel |
| | No.2 | | Taper Type, Special Case Iron |
| Oil Ring Type | | | 3-Piece Type |
| Ring End Gap | No.1 | Specification | 0.20 - 0.35 Millimeter (mm) |
| | | Limit | 0.8 Millimeter (mm) |
| | No.2 | Specification | 0.37 - 0.52 Millimeter (mm) |
| | | Limit | 0.8 Millimeter (mm) |
| | Oil Ring Side Rail | Specification | 0.2 - 0.7 Millimeter (mm) |
| | | Limit | 1.0 Millimeter (mm) |
| Ring Side Clearance | No.1 | Specification | 0.04 - 0.08 Millimeter (mm) |
| | | Limit | 0.1 Millimeter (mm) |
| | No.2 | Specification | 0.03 - 0.07 Millimeter (mm) |
| | | Limit | 0.1 Millimeter (mm) |
| Rings For Service | | | 0.25, 0.50, 0.75, 1.00 mm Oversize |