Main Bearing Bore Dimensions and Cap Torque

OIL CLEARANCE SPECIFICATION
Standard Value 0.02-0.05 mm (0.0008-0.0020 inch)
Wear Limit 0.1 mm (0.004 inch)

THRUST BEARING (CRANKSHAFT END PLAY) SPECIFICATIONS
Standard Value 0.05-0.18 mm (0.0002-0.0071 inch)
Wear Limit 0.25 mm (0.0098 inch)

TIGHTENING SPECIFICATIONS
Bearing Cap Bolts 65-70 Nm (650-700 kg. cm, 47-51 ft. lbs.)

NOTE:
- Using a sequence of center cap, No.2 cap, No.4 cap, front cap and rear cap.
- Cap bolts should be tightened evenly in 4 to 5 stages before they are tightened to specified torque.