Cylinder Block Specifications

SERVICE SPECIFICATIONS
Cylinder Bore 85.00 - 85.03 mm (3.3465 - 3.3476 inch)
Out-Of-Roundness And Taper Of:
Cylinder Bore Less Than 0.01 mm (0.0004 inch)
Flatness Of Gasket Surface:
Specification Less Than 0.05 mm
Limit 0.1 mm (0.004 inch)
Piston Stroke 88 mm (3.46 inch)
Compression Ratio 9.0

MAIN BEARINGS
OIL CLEARANCE SPECIFICATION
Standard Value 0.02-0.05 mm (0.0008-0.0020 inch)
Wear Limit 0.1 mm (0.004 inch)

THRUST BEARING (CRANKSHAFT END PLAY) SPECIFICATIONS
Standard Value 0.05-0.18 mm (0.0002-0.0071 inch)
Wear Limit 0.25 mm (0.0098 inch)