System Specifications

TIGHTENING SPECIFICATIONS
Bearing Bracket To Engine 40-50 Nm (29-36 ft. lbs.)
Detent Spring Bolt 10-12 Nm (90-102 inch lbs.)
Drain Plug 30-35 Nm (22-25 ft. lbs.)
Pressure Check Plug 8-10 Nm (72-84 inch lbs.)
Pulse Generator Mounting Bolt 10-12 Nm (90-102 inch lbs.)
Sprag Rod Support Bolt 20-27 Nm (15-19 ft. lbs.)
Transfer Shaft Cover Bolt 20-27 Nm (15-19 ft. lbs.)