LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1994 >> Excel Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Emission Systems & Sub-Systems >> Exhaust Gas RECIRCULATION (EGR) >> EGR Control Solenoid Valve
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

EGR Control Solenoid Valve

  1. Label and disconnect vacuum hoses and wiring harness from solenoid valve. Connect a hand-held vacuum pump to vacuum nipple where Red or Green-striped vacuum hose was connected, and apply vacuum.
  2. While applying battery voltage to one terminal and grounding the other, ensure vacuum holds. Ensure vacuum is released when battery voltage is discontinued.
  3. Using an ohmmeter, measure resistance between solenoid valve terminals. Resistance should be 36-44 ohms at 68°F (20°C). Replace solenoid if resistance is not within specification.
scientia non olet · About LEMON Manuals