LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1994 >> Excel Base, Automatic, KM176 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System (EIS - 1.5L) >> Power Transistor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Transistor

  1. Disconnect connector from power transistor. Apply 3.0 volts between power transistor terminals No. 2 (negative) and No. 3 (positive). See Fig 1 .
  2. Check continuity between terminals No. 1 and 2. With voltage applied to terminal No. 3, continuity should exist. With voltage removed from terminal No. 3, continuity should not exist. Replace power transistor if continuity is not as specified.
Fig 1: Identifying Power Transistor Connectors
G93E79545Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals